Samsung POWERbot R9350 Vacuum Cleaner manual

The Samsung POWERbot R9350 is a robotic vacuum cleaner designed to provide efficient cleaning with advanced technology. It features powerful suction, smart mapping, and a self-cleaning brush system. The vacuum is equipped with Wi-Fi connectivity, allowing users to control it via a smartphone app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart mapping technology, powerful suction, self-cleaning brush, Wi-Fi connectivity, and remote control.

Feature	Description
Smart Mapping	Maps your home for efficient cleaning paths
Powerful Suction	Strong suction for deep cleaning carpets and hard floors
Self-Cleaning Brush	Automatically removes hair and debris from the brush
Wi-Fi Connectivity	Control the vacuum remotely via smartphone app
Remote Control	Convenient control from a distance

Installation

Unpack and inspect contents. Place the charging dock in an open area.

Connect the charging dock to a power outlet.
Ensure the dock is placed against a wall for optimal docking.
Remove any obstacles around the dock.

WARNING! Ensure the vacuum is charged before first use.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the Samsung Smart Home app.
Connect the vacuum to your Wi-Fi network.
Follow the on-screen instructions to complete setup.

CAUTION! Ensure the vacuum is on a flat surface during setup.

Specifications

Model: POWERbot R9350.
Battery: Lithium-ion, 14.4V.
Run Time: Up to 90 minutes.
Charging Time: Approximately 3 hours.
Weight: 3.6 kg.
Dimensions: 13.8 x 13.8 x 3.9 inches.
Dustbin Capacity: 0.7 liters.
Connectivity: Wi-Fi, compatible with Amazon Alexa and Google Assistant.

Controls and Settings

Access settings via the Samsung Smart Home app or the remote control.

Modes: Auto, Spot, and Manual cleaning modes.

Adjust settings for suction power, scheduling, and cleaning preferences.

Connecting to Wi-Fi

Ensure your Wi-Fi network is active and within range.

Open the Samsung Smart Home app.
Select the vacuum from the device list.
Follow the prompts to connect to your Wi-Fi network.

Tip: Keep your router close to the vacuum for a stable connection.

Cleaning Modes

Choose from various cleaning modes based on your needs.

Auto Mode: For general cleaning.
Spot Mode: For targeted cleaning in a specific area.
Manual Mode: Control the vacuum manually via the app or remote.

WARNING! Do not use in wet conditions.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the filter every month.
Check the brush for hair and debris regularly.

CAUTION! Always turn off the vacuum before maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. For support, visit www.samsung.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum does not start	Battery issue	Check charging dock; ensure vacuum is charged.
No suction	Clogged filter	Clean or replace the filter.
Wi-Fi connection issues	Network problems	Restart the vacuum and router; check app settings.
Brush not spinning	Obstruction	Remove any debris from the brush area.

Reset: Use the app to reset settings if necessary.

Service: Contact Samsung support for assistance.