Samsung POWERbot SR1 M702 Series Vacuum Cleaner Manual

The Samsung POWERbot SR1 M702 Series is a robotic vacuum cleaner designed to provide efficient cleaning with advanced features. It includes smart mapping technology, powerful suction, and a self-cleaning brush system. The vacuum is equipped with Wi-Fi connectivity, allowing users to control it via a mobile app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart mapping, powerful suction, self-cleaning brush, Wi-Fi connectivity, mobile app control.

Feature	Description
Smart Mapping	Maps your home for efficient cleaning paths
Powerful Suction	Strong suction for effective dirt and dust removal
Self-Cleaning Brush	Automatically cleans the brush to prevent tangles
Wi-Fi Connectivity	Control the vacuum remotely via mobile app
Multiple Cleaning Modes	Choose from various cleaning modes for different surfaces

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the area around the dock is free of obstacles.
Place the vacuum on the dock to charge before first use.

WARNING! Ensure the vacuum is turned off while setting up the dock.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the Samsung Smart Home app.
Connect the vacuum to your Wi-Fi network through the app.
Follow the on-screen instructions to complete setup.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Model: Samsung POWERbot SR1 M702.
Battery: Lithium-ion, 14.4V.
Run Time: Up to 90 minutes on a full charge.
Charging Time: Approximately 3 hours.
Weight: 3.5 kg.
Dimensions: 340 x 340 x 97 mm.
Dustbin Capacity: 0.3 liters.
Noise Level: 60 dB.

Controls and Settings

Access settings via the mobile app or the vacuum's onboard controls.

Remote: Start/stop, cleaning mode selection, scheduling options.

Cleaning modes: Auto, Spot, Edge, and Manual.

Connecting to Wi-Fi

Ensure your Wi-Fi network is active and within range.

Open the Samsung Smart Home app.
Select the vacuum from the device list.
Follow the prompts to connect to your Wi-Fi network.

Tip: Keep your router close to the vacuum for optimal connectivity.

Cleaning Modes

Choose from various cleaning modes based on your needs.

Auto Mode: For general cleaning.
Spot Mode: For concentrated cleaning in a specific area.
Edge Mode: For cleaning along walls and corners.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the filter every month.
Check and clean the brush regularly.

CAUTION! Always turn off the vacuum before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Samsung; trademarks of Samsung Electronics Co., Ltd. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum does not start	Battery dead	Charge the vacuum for at least 3 hours.
No suction	Clogged filter or dustbin	Empty dustbin and clean the filter.
Wi-Fi connection issues	Weak signal	Move the router closer to the vacuum.
Brush not spinning	Obstruction	Check for hair or debris around the brush.
App not connecting	Network issues	Restart the app and check Wi-Fi settings.

Reset: Use the reset option in the app if available.

Service: 1-800-SAMSUNG; www.samsung.com