Samsung POWERbot SR20K93 Series Vacuum Cleaner manual

The Samsung POWERbot SR20K93 is a robotic vacuum cleaner designed to provide efficient cleaning with advanced features. It includes smart mapping technology, powerful suction, and a self-cleaning brush system. The vacuum is equipped with Wi-Fi connectivity, allowing users to control it via a smartphone app. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart mapping technology, powerful suction, self-cleaning brush, Wi-Fi connectivity, and remote control.

Feature	Description
Smart Mapping	Maps your home for efficient cleaning paths
Powerful Suction	Strong suction power for effective dirt removal
Self-Cleaning Brush	Automatically cleans the brush to prevent tangles
Wi-Fi Connectivity	Control the vacuum remotely via smartphone app
Scheduling	Set cleaning schedules for convenience
Boundary Markers	Define areas where the vacuum should not go

Installation

Unpack and inspect contents. Place the charging dock in an open area.

Connect the charging dock to a power outlet.
Ensure the dock is placed against a wall for optimal docking.
Remove any obstacles around the dock area.

WARNING! Ensure the vacuum is charged before first use.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the Samsung Smart Home app.
Connect the vacuum to your Wi-Fi network.
Follow the on-screen instructions to complete setup.

CAUTION! Ensure the vacuum is on a flat surface during setup.

Specifications

Model: Samsung POWERbot SR20K93.
Battery: Lithium-ion, 14.4V.
Run Time: Up to 90 minutes on a full charge.
Charging Time: Approximately 3 hours.
Weight: 3.5 kg.
Dimensions: 340 x 340 x 97 mm.
Dustbin Capacity: 0.3 liters.
Connectivity: Wi-Fi 802.11 b/g/n.

Controls and Settings

Access settings via the Samsung Smart Home app or the vacuum's buttons.

Buttons: Power, Home, Spot Clean, and Max Mode.

Settings include scheduling, cleaning modes, and maintenance reminders.

Connecting to Wi-Fi

Ensure your Wi-Fi network is active and within range.

Open the Samsung Smart Home app.
Select "Add Device" and choose your vacuum model.
Follow the prompts to connect to Wi-Fi.

Tip: Keep your smartphone close to the vacuum during setup.

Cleaning Modes

Choose from various cleaning modes for different needs.

Auto Mode: For general cleaning.
Spot Mode: For targeted cleaning in a small area.
Max Mode: For deep cleaning on carpets.

WARNING! Avoid using Max Mode on delicate surfaces.

Maintenance

Regular maintenance ensures optimal performance.

Empty the dustbin after each use.
Clean the filter every month.
Check the brush for hair and debris regularly.

CAUTION! Always turn off the vacuum before maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 Samsung; trademarks of Samsung Electronics Co., Ltd. For support, visit www.samsung.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Power outlet issue	Check outlet; ensure dock is plugged in.
No suction	Clogged filter/dustbin	Empty dustbin; clean filter.
Remote not working	Battery issue	Replace remote batteries.
Wi-Fi connection lost	Network issue	Reconnect vacuum to Wi-Fi via app.
Brush not spinning	Obstruction	Remove debris from brush area.

Reset: Use the app to reset settings if needed.

Service: Contact Samsung support for assistance.