Samsung SR8855 Vacuum Cleaner Manual

The Samsung SR8855 is a powerful robotic vacuum cleaner designed for efficient cleaning of various surfaces. It features advanced navigation technology, a high-efficiency filter, and a sleek design that allows it to reach tight spaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation system, HEPA filter, remote control, charging dock, and various cleaning modes.

Feature	Description
Smart Navigation	Efficiently maps and navigates your home
HEPA Filter	Traps allergens and dust particles
Remote Control	Conveniently control the vacuum from a distance
Charging Dock	Automatically returns to dock for charging
Multiple Cleaning Modes	Choose from various cleaning patterns

Installation

Unpack and inspect contents. Place the charging dock in a suitable location.

Connect the charging dock to a power outlet.
Ensure the area around the dock is clear for easy access.
Place the vacuum on the dock to charge before first use.

WARNING! Ensure the vacuum is turned off during installation.

First-Time Setup

Power on the vacuum; follow the on-screen prompts.

Connect to Wi-Fi: Use the app to connect the vacuum to your home network.
Set cleaning schedule: Program the vacuum to clean at your preferred times.
Test run: Perform a test cleaning to ensure proper operation.

CAUTION! Ensure the area is free of obstacles before starting.

Specifications

Model: Samsung SR8855
Battery: Lithium-ion, 2600mAh
Run Time: Up to 90 minutes
Charging Time: Approximately 3 hours
Weight: 3.5 kg
Dimensions: 34 x 34 x 9.5 cm
Filter Type: HEPA filter
Noise Level: 60 dB

Controls and Settings

Access settings via the app or remote control. Key functions include start/stop, cleaning mode selection, and scheduling.

Remote: Power, Start, Stop, Schedule, Mode selection.

Connecting to the App

Download the Samsung Smart Home app to connect and control your vacuum.

Open the app and create an account or log in.
Follow the prompts to add your vacuum to the app.
Control and monitor your vacuum remotely.

Tip: Ensure your smartphone is connected to the same Wi-Fi network.

Cleaning Modes

Choose from various cleaning modes: Auto, Spot, Edge, and Schedule.

Auto Mode: For general cleaning of the entire area.
Spot Mode: For concentrated cleaning in a specific area.
Edge Mode: For cleaning along walls and corners.
Schedule Mode: Set specific times for automatic cleaning.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the filter every month.
Check for blockages in brushes and wheels.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth to wipe the vacuum.

CAUTION! Do not use liquids or abrasive cleaners.

Regulatory Information

This device complies with FCC Part 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Power outlet issue	Check outlet and connections.
No suction	Full dustbin or clogged filter	Empty dustbin and clean filter.
Remote not working	Batteries	Replace batteries in the remote.
Navigation issues	Obstacles in the way	Clear the area of obstacles.

Reset: Refer to the app for reset options.

Service: Contact Samsung support for assistance.