Samsung SR8950 Vacuum Cleaner Manual

The Samsung SR8950 is a powerful robotic vacuum cleaner designed to provide efficient cleaning with advanced features. It includes smart navigation, powerful suction, and a variety of cleaning modes to tackle different surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation system, powerful suction, multiple cleaning modes, Wi-Fi connectivity, and mobile app control.

Feature	Description
Smart Navigation	Uses sensors to map and navigate your home efficiently.
Powerful Suction	High-performance motor for deep cleaning on carpets and hard floors.
Multiple Cleaning Modes	Customizable modes for different cleaning needs (Auto, Spot, Edge).
Wi-Fi Connectivity	Connects to your home network for remote control via app.
Mobile App Control	Schedule cleanings and monitor performance from your smartphone.

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the area around the dock is free of obstacles.
Place the vacuum cleaner on the dock to charge before first use.

WARNING! Ensure the vacuum is turned off during installation to avoid accidental activation.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the Samsung Smart Home app.
Create an account or log in.
Follow the in-app instructions to connect the vacuum to Wi-Fi.
Set your cleaning schedule and preferences.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Model: Samsung SR8950.
Battery Type: Lithium-ion.
Battery Life: Up to 90 minutes on a full charge.
Charging Time: Approximately 3 hours.
Weight: 3.5 kg.
Dimensions: 34 x 34 x 9 cm.
Noise Level: 65 dB.
Connectivity: Wi-Fi 802.11 b/g/n.

Controls and Settings

Access settings via the mobile app or the physical buttons on the vacuum.

Remote: Start/stop cleaning, return to dock, and select cleaning modes.

Settings: Adjust cleaning schedules, suction power, and maintenance reminders through the app.

Connecting to Wi-Fi

Ensure your vacuum is charged and within range of your Wi-Fi network.

Open the Samsung Smart Home app.
Select "Add Device" and choose your vacuum model.
Follow the prompts to connect to your Wi-Fi network.

Tip: Ensure your Wi-Fi network is stable for optimal performance.

Cleaning Modes

Choose from various cleaning modes to suit your needs.

Auto Mode: For general cleaning of the entire area.
Spot Mode: For targeted cleaning of a specific area.
Edge Mode: For cleaning along walls and corners.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance

Regular maintenance ensures optimal performance.

Empty the dustbin after each use.
Clean the filters every month.
Check for blockages in the brushes and wheels.

CAUTION! Always turn off the vacuum before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth to wipe the vacuum.

CAUTION! Do not use liquids or aerosols on the vacuum.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum does not start	Battery dead	Charge the vacuum for at least 3 hours.
No suction	Clogged filter	Clean or replace the filter.
Navigation issues	Obstacles in the way	Clear the area of obstacles.
Wi-Fi connection failed	Weak signal	Move the charging dock closer to the router.
Dustbin full	Needs emptying	Empty the dustbin and clean the filter.

Reset: Use the app to reset the vacuum if needed.

Service: For support, contact Samsung customer service.