Samsung SR8987 Vacuum Cleaner manual

The Samsung SR8987 is a powerful robotic vacuum cleaner designed to provide efficient cleaning with minimal effort. It features advanced navigation technology, multiple cleaning modes, and a high-efficiency filter system to capture dust and allergens. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, HEPA filtration, remote control, scheduling options, and multiple cleaning modes.

Feature	Description
Smart Navigation	Uses sensors to map and navigate your home efficiently.
Powerful Suction	Strong suction power for effective dirt and dust removal.
HEPA Filter	Catches allergens and fine dust particles.
Remote Control	Convenient control from a distance.
Scheduling	Set cleaning schedules for automatic operation.
Multiple Cleaning Modes	Choose from various modes for different cleaning needs.

Installation

Unpack and inspect contents. Place the vacuum on a flat surface.

Charge the vacuum: Connect the charging dock to a power outlet.
Place the vacuum on the dock: Ensure it aligns properly for charging.
Download the app: For remote control and scheduling features.

WARNING! Ensure the charging dock is in a dry area away from moisture.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Connect to Wi-Fi: Follow instructions in the app to connect.
Set cleaning preferences: Choose your preferred cleaning modes.
Schedule cleaning: Set a cleaning schedule through the app.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Model: Samsung SR8987.
Battery: Lithium-ion, 2600mAh.
Run Time: Up to 90 minutes on a full charge.
Charging Time: Approximately 4 hours.
Weight: 3.5 kg.
Dimensions: 34 x 34 x 9.5 cm.
Filter Type: HEPA filter.
Noise Level: 65 dB.

Controls and Settings

Access settings via the app or remote control. Front Panel: Power button, cleaning mode selection.

Remote: Start/stop, scheduling, mode selection.

Cleaning modes: Auto, Spot, Edge, and Manual. Adjust settings for suction power and cleaning schedules.

Connecting Devices

Wi-Fi: Connect the vacuum to your home network via the app.

Ensure the vacuum is powered on.
Follow the app instructions to connect.
Test the connection by starting a cleaning cycle from the app.

Tip: Keep your router within range for optimal connectivity.

Operating the Vacuum

To start cleaning, press the power button or use the app.

Choose a cleaning mode: Auto, Spot, or Edge.
Press START or tap the app to begin.
Monitor cleaning progress via the app.

WARNING! Do not block the vacuum's sensors during operation.

Maintenance and Care

Regularly clean the dustbin and filter for optimal performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

Complies with FCC regulations for electronic devices. For support, visit www.samsung.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Power source issue	Check outlet and charging dock connection.
No suction	Clogged filter	Clean or replace the filter.
Remote not working	Batteries	Replace remote batteries.
Vacuum not connecting to Wi-Fi	Network issues	Check Wi-Fi settings and router.
Vacuum stops mid-cleaning	Low battery	Return to dock for charging.

Reset: Use the app to reset settings if needed.

Service: 1-800-SAMSUNG; www.samsung.com